Single Facer

Home > Products > Single Facer

MJSF-268I Single Facer (Inner Vacuum)

Main Technical Parameter Structural features: 1. Vacuum Inner adsorption, with a high-pressure blower. With wind control device machine, electrical control box to focus on the same host ,not less than 1.5 m , the operating side of the closed side of the hood. 2. Gimbal drive, Separation...

??6.png

Main Technical Parameter

No

Name

Technical Parameters

1

Working width

1600mm

2

Design speed

80m/min

3

Operation Direction

According to customer's meed

4

Flute type

E, F, G Flute

5

Basement material

Casting HT200

6

Wallboard

Casting HT200/130mm thickness

7

The up and lower roller diameter

f280mm/Alloy steel roller

8

Pressure roller diameter

f280mm /45Steel

9

Upper and lower pre-heating diameter

F320mm /45Steel

10

Main frequency conversion motor

(with inverter )15kw

11

Blower

11kw

12

Pneumatic power

0.4—0.9Mpa?

13

Electric adjustment  glue width

Vertical gear reduction motor  100W  i=1:25

14

Electrical adjust glue thickness

Horizontal geared motor 100W  i=1:1800

Structural features:

1. Vacuum Inner adsorption, with a high-pressure blower. With wind control device machine, electrical control box to focus on the same host ,not less than 1.5 m , the operating side of the closed side of the hood.

2. Gimbal drive, Separation structure, Independent drive box, Enclosed gear oil immersion type lubrication ,can prolong the life of the gearing.

3. Corrugated roller diameter Ø280mm,adopt 48CrMo high quality ally steel, after quenching and tempering, hardening, polished surface chrome plated hardness of HRC60 degrees, the cylinder control up and down .

4.Pressure roller diameter Ø280mm ,modulation processing with 4 carbon steel, machining and grinding off the surface chrome plated cylinder control up and down .

5. The upper and lower Preheat roll diameter Ø320mm, machining and grinding off the surface hard chrome plated, all metal hose connection.

6. Pneumatic control glue , glue roller diameter Ø215mm, engraved with the pit-style textured back surface polished, hard chrome plated, transfer roller surface machining and grinding off the hard chrome plating.

7. Corrugated roller bearings with high temperature and pressure grease lubricated bearings.

8. Corrugated roller unilateral high 0.10 mm, pressure roller unilateral high 0.075 mm. Add spacing device, pressure cylinder for Ø 160 mm.

9. Bearing: HAERBIN brand

10. Electronic components and accessories: SHINAIDE, DELIXI brand.

11. Pneumatic components. rotary joints, metal hose: YADEKE,TENGZHOU brand.

ROYAL is one of the leading China mjsf-268i single facer (inner vacuum) manufacturers, welcome to wholesale cheap mjsf-268i single facer (inner vacuum) from our factory.

Related Products